Simple CRT Notices Map/List

The Problem Every Boater Knows

You’ve planned the route, provisioned the boat, and set off early. Then — somewhere around the second lock — you find out the next flight is closed for maintenance. It’s been closed for two weeks. The notice has been on the Canal & River Trust website the whole time.

Finding CRT notices isn’t hard, but making sense of them is. The official list covers every waterway in the country, and trawling through it to find the handful that affect your particular stretch of canal — before you’ve even loaded the coal — is nobody’s idea of trip planning.

The Canal Maps CRT Notices Map solves that. It pulls every active Canal & River Trust notice, plots them on an interactive map, snaps them to the waterway network, and shows you only the ones that matter for where you’re going. Here’s everything it can do.


Every Notice Type, Colour-Coded at a Glance

Not all notices are equal. A towpath closure is a nuisance for walkers but no barrier to a boat. A full navigation closure, on the other hand, stops your trip dead. The Notices Map separates these clearly with eight distinct categories, each in its own colour:

  • Navigation Closure (red) — the waterway is completely closed to boats. This is the one that changes your plans.
  • Navigation & Towpath Closure (purple) — both the waterway and the towpath are blocked, typically for serious structural or safety work.
  • Navigation Restriction (orange) — boats can pass but with conditions: reduced speed, one-way working, a temporary lock outage, or a narrow passage.
  • Navigation Restriction & Towpath Closure (orange) — restricted boating plus a closed path alongside.
  • Towpath Closure (dark red) — walkers and cyclists are affected but boats pass freely.
  • Towpath Restriction (gold) — limited towpath access, often around construction or bank works.
  • Advice (amber) — informational notices: rising water levels, shallow sections, congestion warnings, or anything worth knowing before you set off.
  • Customer Service Facility (green) — a facility (elsan point, water tap, visitor moorings) that is temporarily out of service.

All eight types appear as coloured chips along the top of the map. Each chip is a toggle — click to hide that type, click again to bring it back. Turning off towpath closures entirely, for example, immediately strips out all the notices that don’t affect your passage, leaving only the ones that do. The legend bar below the map shows a live count for each type as you filter.

Markers That Actually Sit on the Canal

CRT’s raw notice data provides coordinates, but those coordinates are often the middle of a straight-line span between two points — which on a winding canal might put the marker in a field. The Canal Maps notices map snaps every marker to the nearest point on the actual canal route, so you see notices exactly where they belong: on the blue line of the waterway, not floating somewhere in the adjacent countryside.

When a notice covers a stretch of canal — a section of a pound, a whole lock flight — a line is drawn along the route between the two endpoints. That line follows the real waterway geometry, bending around every meander, rather than cutting a straight chord across the bends. If the affected section crosses a junction between different canal segments, the routing engine bridges them automatically provided they’re within 200 metres of each other, preventing it from accidentally connecting waterways that happen to be geographically close but are not actually linked.

Route-Aware Filtering: Only Your 500-Metre Strip

The map knows your route. Load it up and it applies a proximity filter by default: only notices within 500 metres of your planned waterway are shown. The Grand Union notices don’t crowd out the map when you’re planning a trip on the Llangollen.

The proximity check is smarter than it sounds. On a tightly-looping canal, a straight-line distance from the centre of a notice to your route could put something well within 500 metres even though it’s on a completely different arm. The map measures distance to the nearest actual point on your route, so a notice on a branch canal doesn’t get flagged simply because the main line passes nearby.

If you want to look beyond your immediate route — perhaps to check what’s happening further along the network, or to see a notice you spotted mentioned somewhere — tick the Show off-route notices checkbox. The in-route notices disappear and everything outside your 500-metre strip comes into view, plotted at their original CRT coordinates. One tick, then untick, and you’re back to your planned route view.

Click a Marker, Get the Full Picture

Every marker on the map is interactive. Click one and a popup opens with everything CRT publishes about that notice:

  • Type — the colour-coded category badge
  • Title — the official CRT notice name
  • Waterway & region
  • Reason — why the notice was raised: maintenance, repair, emergency, low water levels, vegetation, pollution, third-party works, and more
  • Start and finish dates — or “Ongoing” if no end date has been set
  • Current status — CRT’s live state for the notice
  • A direct link to the full notice page on the CRT website

The finish date field is worth paying attention to. Closures without an end date — shown as “Ongoing” — are often the most serious; CRT tends to set a firm end date on routine maintenance but leaves emergency repairs open-ended until the work is assessed.

Search, Then Filter, Then Decide

If you know the waterway you’re interested in, the search box above the map narrows results by title or waterway name as you type (with a short pause so it doesn’t fire on every keystroke). Type “Kennet” and you’ll see all Kennet & Avon notices instantly. Type “maintenance” and every notice with that word in the title surfaces. Clear the box with the × button and the full filtered view returns. Search and type filters work together — you can hide “Advice” notices and search for a specific waterway at the same time.

The status bar just below the filter chips keeps you informed: it shows how many notices are visible against the total, how many have been filtered out, and — if any CRT notices exist without map coordinates — how many are waiting in the list below the map rather than on it.

Notices Without a Map Location

Occasionally, CRT publishes a notice without geographic coordinates attached — a canal-wide advisory, for example, or a notice that was entered without a pinpoint location. These can’t be plotted on the map, so rather than silently losing them, they appear in a dedicated list section directly below the map widget: same type badge, title, waterway, status, and date range, but as a readable list rather than a marker. Nothing slips through unnoticed.

The A–Z List: When You Want to Browse, Not Spot

The map is great for spatial context — for seeing where something is relative to your route. But if you want to methodically check every active notice on a particular waterway, the companion CRT Notices A–Z page is better suited. It lists every notice alphabetically by waterway, with notice counts for each, and every entry links directly to the CRT website for the full official detail.

The map and the list are linked: a button at the bottom of the map takes you directly to the A–Z list with a single click, and the list page has a reciprocal link back to the map. Switch between them depending on how you want to work.

Where You Are on the Map

The Locate Me button (bottom of the zoom controls, top-left) drops a pulsing blue dot at your current GPS position, with an accuracy circle showing how precise the reading is. The map pans to centre on you. If you’re already moored up and checking what’s ahead, this puts your current position in context against the notices around you immediately — no searching for your stretch of canal, no manually scrolling to find where you are.

Four Base Maps, Three Overlays, Full Screen

The layer control in the top-right corner gives you four base map options: the standard OpenStreetMap street view, an Esri satellite image, a topographic overlay, and a hybrid (satellite with road labels). For most notice-checking purposes, the street map is clearest, but the satellite view is useful when a notice mentions a specific feature — a bridge, a lock cut, a boatyard — and you want to see exactly what the terrain looks like.

Three optional overlays can be switched on independently: hiking trails, cycling routes, and rail lines. The full-screen button expands the map to fill the entire browser window — useful on a tablet when you want to see a long stretch of canal end to end without the surrounding page getting in the way.

Always Fresh: Twice-Daily Automatic Updates

CRT notice data is fetched from the Canal & River Trust API and cached on the Canal Maps server. The cache refreshes automatically twice a day — typically mid-morning and mid-afternoon — so the map is never more than a few hours behind whatever CRT has published. Notices that have ended are automatically excluded from counts and filtered out of the active display; only current and upcoming notices are shown.

By default the map shows notices up to 26 weeks into the future, so you can see planned maintenance that’s been scheduled months ahead — useful when you’re doing long-trip planning well in advance of casting off.


Try It Now

The CRT Notices Map and the A–Z list are both live and free to use — no account required. Head to the CRT Notices Map and have a look at what’s active on the waterways right now. If you’re planning a trip, check it a day or two before you leave and again on the morning you set off; things do change, and it’s always better to know before the boat’s engine is running.

And if you find a notice is out of date, or you spot something on the waterway that isn’t listed, the CRT website has a reporting mechanism — the map links directly to each notice’s official page where you can find the contact details.

Safe travelling. 🚢

© 2026 . | Privacy Policy
Links on this site do not constitute a recommendation or endorsement of any business, product, or service.