This guide walks you through everything you need to record and share your canal trips using the Canal Maps Boat Log.
Contents
- Creating an Account
- Logging In
- Creating Your First Trip
- Logging a Position
- Editing an Entry
- Adding Routing Waypoints
- Logging a POI Visit
- Trip Visibility & Sharing
- Embedding Your Trip Map in a Blog Post
- Managing Trips & Entries
- Resetting Your Password
1. Creating an Account
To start logging your trips you need a free account. Accounts are reviewed and approved by the site administrator, so please allow a short time after registering before you can log in.
How to register
- Go to the Boat Log page and click the Register tab.
- Enter your email address — this is your login and is kept private.
- Enter your boat name — this appears on your shared maps and embeds.
- Optionally enter a display name (e.g. your first name). If you leave this blank, your boat name is used.
- Choose a password (at least 8 characters), then type it again in the Confirm Password field to make sure there are no typos.
- Click Create Account.
What happens next
After clicking Create Account you will see a confirmation panel explaining the three steps:
- Check your inbox (and spam folder) for a verification email from us. Click the link inside it to confirm your address. The link is valid for 48 hours.
- We review your account. Once you have verified your email, we will be notified and will approve your account. This is usually done within a day or two.
- You receive an approval email and can then return to the Boat Log page and log in using the Log In tab.
If the verification email does not arrive, check your spam folder. If the link has expired (after 48 hours), contact us using the support form and we can resend it.
2. Logging In
- Go to the Boat Log page.
- Make sure the Log In tab is selected.
- Enter your email address and password, then click Log In.
If you have forgotten your password, click Forgot password? below the login form and follow the instructions in section 11.
3. Creating Your First Trip
A trip is a single cruise — for example, “Stourport Ring 2024” or “Weekend to Stratford”. Each trip has its own map, timeline of logged positions, waypoints, and list of places visited.
- After logging in, click + New Trip in the top bar.
- Give your trip a name.
- Choose a visibility setting (see section 8 for details). You can change this at any time.
- Click Create Trip.
Your new trip appears in the trip list. Click it to open the map and start logging.
4. Logging a Position
A logged position marks where your boat was at a particular date and time. The map draws a trail connecting your entries, following the canal route where possible. There are two ways to drop a pin:
Drop Pin at GPS Location
Uses your device’s GPS to place a pin at your current physical location. Best used when you are on the boat and want to record exactly where you are.
- Make sure a trip is open (its name appears in the top bar).
- Click Drop Pin at GPS Location in the toolbar above the map.
- A form appears below the map. Your device locates you and fills in the coordinates. While it is locating you can also tap the map to place the pin manually.
- Fill in as much or as little detail as you like:
- Location — the name of the mooring or place (e.g. “Braunston Marina”).
- Arrived — the date and time you arrived (pre-filled with the current time).
- Leaving (optional) — the date and time you left.
- Comment — any notes about the stop. These appear in the map popup.
- Click Save.
Drop Pin on Map
Instantly saves a pin at the centre of whatever part of the map you are currently looking at — no form, no GPS required. Useful when you want to quickly mark a location you have panned to, or when GPS is unavailable.
- Pan and zoom the map until the location you want to mark is in the centre.
- Click Drop Pin on Map in the toolbar.
- The entry is saved immediately and appears in the log and on the map. A “Pin dropped ✓” message confirms it.
- To add a location name, comment, or other details, click the new marker (or the entry in the log list) to open the edit panel.
The trail between entries is redrawn each time you add a pin. Repeat for each overnight stop or mooring along your route.
Tip: Log entries in the order you travel — earliest stop first. If you need to add an earlier stop later, you can edit its date afterwards to put it in the right place.
5. Editing an Entry
You can edit any entry at any time — to correct a date, move the pin, add mooring details, engine hours, fuel, or weather notes. This is also how you add a location name or comment to a pin you dropped quickly using Drop Pin on Map.
Opening the entry panel
Click any arrow or circle marker on the map, or click an entry in the log list below the map. A panel slides in from the right with two tabs:
- Edit Entry — a form pre-filled with the entry’s current details. Make your changes and click Save. The map and log list update immediately without reloading the page.
- Log — a scrollable list of all entries in the trip. Click any entry to jump straight to its edit form.
What you can edit
- Location name — the mooring or place name shown in map popups.
- Arrived / Leaving dates & times — correct the timestamp or add a departure time.
- Comment — notes that appear in the map popup when a visitor clicks the marker.
- Engine hours — a running total of engine hours at this stop.
- Fuel (litres) — fuel taken on at this stop.
- Weather note — a brief note on conditions.
Moving a marker
If you logged a position in slightly the wrong place, drag the marker on the map to the correct spot. The position is saved automatically when you release it.
6. Adding Routing Waypoints
Routing waypoints let you add intermediate points along your route between two logged entries — for example, to make the trail follow a turn in the canal that your start and end positions alone wouldn’t capture.
- Click Routing Waypoint in the toolbar above the map.
- Click on the map at the point you want to add. The waypoint is automatically placed between the two closest entries.
- Optionally add a label to the waypoint.
Waypoints appear as small grey diamond shapes on the map and are included in the trail. You can drag them to adjust their position, or delete them from the log list.
7. Logging a POI Visit
You can record Places of Interest that you visited during your trip — pubs, restaurants, locks, marinas, visitor attractions and more. These appear as icons on the map.
- Click POI Visit in the toolbar above the map.
- Start typing the name of the place in the search box.
- Select the correct result from the dropdown list.
- Set the date visited and optionally a time and a note.
- Click Add Visit.
The place is added to the map with its icon (a pub glass for a bar, a lock icon for a lock, and so on) and appears in the log list alongside your entries.
Note: POIs come from the Canal Maps database. If a place you visited is not listed, you can submit it for inclusion.
8. Trip Visibility & Sharing
Each trip has three visibility settings. You can change these at any time from the trip settings panel (click Trip settings below the map when a trip is open).
| Setting | Who can see it | When to use it |
|---|---|---|
| Private | Only you, when logged in | Trips you are still recording, or personal logs you do not want to share |
| Unlisted | Anyone with the link | Share with friends and family without making the trip publicly searchable |
| Public | Everyone | Trips you want other boaters to find |
Sharing links
For Unlisted and Public trips, two links are available in the trip settings:
- Direct link — a unique URL you can share by email, WhatsApp, or post on social media. Anyone with this link can view the full interactive map. The link never changes unless you set the trip back to Private.
- Embed code — a snippet of HTML for embedding the map in a blog or website (see section 9).
9. Embedding Your Trip Map in a Blog Post
You can embed a live, interactive version of your trip map directly into a blog post or page on any website.
WordPress
- Open the trip settings for an Unlisted or Public trip and click Copy code next to the embed code.
- In the WordPress editor, add a Custom HTML block and paste the code in.
- Publish or update the post.
Blogger
- Copy the embed code from the trip settings.
- Open your blog post, switch to HTML view, and paste the code where you want the map to appear.
- Save or publish the post.
The embedded map shows the full trip trail, entry markers with popups, waypoints, and POI icons. Visitors can zoom, pan, and click markers to read your notes — no login required.
Tip: the embedded map works on all devices. On a phone, visitors use two fingers to pan the map.
10. Managing Trips & Entries
Renaming a trip
When a trip is open, click the pencil icon (✏) in the top bar to rename it.
Changing trip visibility or description
Click Trip settings below the map (when a trip is open) to change the visibility or access the sharing links.
Deleting an entry
Click an entry marker on the map to open the side panel, then use the Delete button in the Edit Entry form. You will be asked to confirm. The marker and trail are updated immediately.
Deleting a trip
Open Trip settings and click Delete trip. This permanently deletes the trip along with all its entries, waypoints, and POI visits and cannot be undone.
Downloading a backup
To save a copy of a trip, click the download icon (↓) in the top bar while the trip is open. This downloads a .blb backup file that can be restored later if needed.
Restoring from backup
On the trip list screen, click Restore from backup and select a .blb file. The trips in that file are added to your account alongside any existing trips.
11. Resetting Your Password
- Go to the Boat Log page and click Forgot password? below the login form.
- Enter your email address and click Send Reset Link. The button greys out to confirm the request has been sent.
- Check your inbox and spam folder for an email from Canal Maps. The reset link is valid for 1 hour.
- Click the link in the email. You are taken back to the Boat Log page, which now shows the password reset form.
- Enter your new password (at least 8 characters) and type it again in the Confirm new password field.
- Click Set New Password. You can now log in with your new password.
For security, setting a new password automatically logs you out of any other devices you were signed in on.
Need help?
If you have a question not answered here, use the support form and we will get back to you as soon as we can.